ZP Vertical Z-joint
Vertical Z-joint is used in case of impossibility of standard vertical joint application. It can be used both horizontal and vertical positions depends on certain project.Note: this unit is non-standard one and be manufactured individually within certain project. Cmax is specified by equipment manufacturer.
Ф
1250
- KLM-S
- 10
- Cu
- 55
- 4
- 1
- ZP
Order sample: 1000A, copper, IP55, with 4 conductors, steel enclosure
|
Busbar code |
Rated current, А |
4Р, 5P | |||
|---|---|---|---|---|---|
| Aluminium | Copper | ||||
| Сmin, mm | Dmin, mm | Сmin, мmm | Dmin, mm | ||
| 08 | 800 | 220 | 310 | 220 | 310 |
| 10 | 1000 | 260 | 530 | 220 | 310 |
| 12 | 1250 | 300 | 550 | 220 | 310 |
| 16 | 1600 | 380 | 590 | 260 | 530 |
| 20 | 2000 | 420 | 610 | 300 | 550 |
| 25 | 2500 | 504 | 652 | 424 | 612 |
| 32 | 3200 | 664 | 732 | 504 | 652 |
| 40 | 4000 | 744 | 772 | 584 | 702 |
| 50 | 5000 | 964 | 882 | 936 | 878 |
| 63 | 6300 | 1400 | 1100 | 1068 | 944 |
The standard (minimum) length of joint unit sides is indexed on the drawings and tables. Manufacture of units with non-standard dimensions is possible by order.