FE-S Non-standard straight unit
This unit can be manufactured with different length:
| 500–999mm | - | S1 |
| 1000–1999mm | - | S2 |
| 2000–2999mm | - | S3 |
Ф
1250
- KLM-S
- 10
- Cu
- 55
- 4
- 1
- FE
- S2
Order sample: 1000A, copper, IP55, with 4 conductors, steel enclosure, length 1100 mm*
*Precise length is shown in the note to specification of equipment.
Non-standard unit measurement and calculation
Non-standard unit dimension, required for installation between samples, is 560 mm. Dimension of unit is found as net distance between 2 units installed minus 30 mm. This distance is required for two joint units installation.
Non-standard unit dimension, required for installation between samples, is 560 mm. Dimension of unit is found as net distance between 2 units installed minus 30 mm. This distance is required for two joint units installation.