BB Bolt-on box
Bolt-on box is installed at any mating area of two units.This element can be manufactured with non-standard features:
- Box dimension.
- Numbers and dimension of cable gland in a wafer for socket.
- Switching/protection equipment (automatic circuit breaker, releaser). Installation of drive motor with remote control is also possible.
- Installation of protection device of any manufacturer.
- Installation of protection device of Client.
- Box door type (right, left, on bolts etc.).
Note: tap-off box is installed after the busbar turn off from the network and control of voltage availability only. Special GF joint unit is required for the installation.
- KLM-S
- 16
- Cu
- 55
- 4
- 1
- BB
- 800
- Y1
Order sample: Bolt-on box 800A with automatic circuit breaker in a cast resin enclosure with control lever, busbar trunking system 1600A, IP55, with 4 copper conductors, steel enclosure
|
Maximum current capacity, А |
А, mm |
B, mm |
C, mm |
|---|---|---|---|
| Up to 160 | 500 | 285 | 220 |
| 160 | 700 | 285 | 220 |
| 250 | 700 | 285 | 220 |
| 320-630 | 850 | 350 | 290 |
| 800-1250 | 1060 | 400 | 310 |
Brand, type and automatic circuit breaker maximum current in the tap-off box is indexed separately in the notes to the order code.