ZP Vertical Z-joint
Vertical Z-joint is used in case of impossibility of standard vertical joint application. It can be used both horizontal and vertical positions depends on certain project.
Note: this unit is non-standard one and be manufactured individually within certain project. Cmax is specified by equipment manufacturer.
Ф
630
- KLM-R
- 06
- Cu
- 55
- 4
- 1
- ZP
Order sample: 630A, copper, IP55, with 4 conductors, steel enclosure
|
Busbar code |
Rated current, А |
4Р, 5P | |||
|---|---|---|---|---|---|
| Aluminium | Copper | ||||
| Сmin, mm | Dmin, mm | Сmin, mm | Dmin, mm | ||
| 00 | 100 | 362 | 148 | - | - |
| 01 | 160 |
362 |
148 |
362 | 148 |
| 02 | 250 |
362 |
148 |
362 |
148 |
| 03 | 315 |
362 |
148 |
362 |
148 |
| 04 | 400 |
362 |
148 |
362 |
148 |
| 05 | 500 | 411 | 246 | 362 |
148 |
| 06 | 630 | 411 | 246 | 362 |
148 |
| 08 | 800 | - | - | 411 | 246 |
The standard (minimum) length of joint unit sides is indexed on the drawings and tables. Manufacture of units with non-standard dimensions is possible by order.